Sennheiser EW IEM G4 TWIN In-Ear Monitor System

$1,349.00

Brand:

  • Sennheiser

-

Availability: Out stock

Out of stock

SKU: EWIEM2G4-G Categories: ,

Sennheiser EW IEM G4 TWIN In-Ear Monitor System

The Sennheiser G4 TWIN in-ear monitoring system makes your gig an extraordinary experience — not just for your audience, but also for you. This IEM system includes one half-rack transmitter, and two bodypack receivers with earphones, for sending the same monitor mix to two performers.

What’s in the Box:

– SR IEM G4 stereo transmitter
– 2 EK IEM G4 stereo receiver
– 2 IE 4 earphones
– 4 AA batteries
– rod antenna
– GA 3 rackmount set
– quick guide
– safety guide
– manufacturer declaration sheet
– power supply

IEM Series Features

– Half-rack stereo transmitter in an all-metal housing with OLED display for full control
– Improved, easier and faster wireless synchronization between transmitter and receiver via new infrared backlit IR area that makes it more obvious where to hold the components for fast sync
– Compatible with Sennheiser WSM control software for flexible frequency allocation
– Up to 16 compatible channels
– Up to 42 MHz bandwidth with 1680 selectable frequencies, fully tunable in a stable UHF range
– Transmission range: up to 100 meters / 330 feet
– High RF output power (up to 50 mW, adjustable in three steps – 10/30/50) depending on country regulations.

 

SR IEM G4 Specifications
– Frequency Range: 516 – 558 MHz
– Receiving Frequencies:
– Max. 1680 frequencies, adjustable in 25 kHz steps
¬- 20 frequency banks, each with up to 16 factory-preset channels, no intermodulation
– 6 frequency banks with up to 16 programmable channels
– Switching Bandwidth: up to 42 MHz
– Nominal/Peak Deviation: ±24 kHz / ±48 kHz
– MPX Pilot Tone (Frequency/Deviation): 19 kHz/±5 kHz
– Frequency Stability: ±10 ppm
– Antenna Output: BNC socket, 50 O
– RF Output Power At 50 O Switchable:
– Low: typ. 10 mW
– Standard: typ. 30 mW
– High: typ. 50 mW
– Compander System: Sennheiser HDX
– AF Frequency Response: 25 Hz to 15 kHz
– AF Input:
– BAL AF IN L (I) + MONO/
– BAL AF IN R (II)
– 2x XLR-3/¼” (6.3 mm) jack combo socket, electronically balanced
– Max. Input Level: +22 dBu
– Total Harmonic Distortion (THD): <0.9 %
– Signal-to-Noise Ratio (At Nominal Load And Peak Deviation): >90 dB
– AF Output:
– LOOP OUT BAL L (I)/LOOP OUT BAL R (II)
– ¼” (6.3 mm) stereo jack socket, balanced
– Temperature Range: -10 °C to +55 °C
– Power Supply: 12 V DC
– Current Consumption: max. 350 mA
– Dimensions: Approx. 202 x 212 x 43 mm
– Weight: Approx. 980 g

EK IEM G4 Specifications
– Frequency Range: 516 – 558 MHz
– Receiving Frequencies:
– Max. 1680 frequencies, adjustable in 25 kHz steps
– 20 frequency banks, each with up to 16 factory-preset channels, no intermodulation
– 6 frequency banks with up to 16 programmable channels
– Switching Bandwidth: up to 42 MHz
– Nominal/Peak Deviation: ±24 kHz / ±48 kHz
– Receiver Principle: Adaptive diversity
– Sensitivity (With HDX, Peak Deviation): < 4 µV, typ. 1.6 µV for 52 dBA rms S/N
– Adjacent Channel Selection: Typically = 65 dB
– Intermodulation Attenuation: Typically = 70 dB
– Blocking: = 80 dB
– Squelch: 5 to 25 dBµV, adjustable in steps of 2 dB
– Pilot Tone: Squelch (can be switched off)
– Compander System: Sennheiser HDX
– Signal-To-Noise Ratio (1 mV, peak deviation): approx. 90 dBA
– Total Harmonic Distortion (THD): = 0.9 %
– Output Power At 2.4 V, 5 % THD, Nominal Deviation: 2 x 100 mW at 32?
– High Boost: +8 dB at 80 kHz
– Limiter: -18 dB to -6 dB, adjustable in steps of 6 dB, can be switched off
– Temperature Range: -10 °C to +55 °C
– Power Supply: 2 AA batteries, 1.5 V or BA 2015 accupack
– Nominal Voltage: 3 V battery / 2.4 V rechargeable battery
– Current Consumption at Nominal Voltage: approx. 140 mA with transmitter switched off: = 25 µA
– Operating Time: approx. 4 to 6 hours (depending on volume level)
– Dimensions: Approx. 82 x 64 x 24 mm
– Weight (incl. batteries): approx. 125 g

Dimensions and Weight in Packaging
Band A (516-558 MHz)
Shipping Weight: 6.5 lbs
Shipping Dimensions: 16 x 14 x 3 in
Manufacturer Part Number (MPN): 509614
Band A1 (470-516 MHz)
Shipping Weight: 6.5 lbs
Shipping Dimensions: 16 x 14 x 3 in
Manufacturer Part Number (MPN): 509613
Band G (566-608 MHz)
Shipping Weight: 6.5 lbs
Shipping Dimensions: 16 x 14 x 3 in
Manufacturer Part Number (MPN): 509615