Shure Axient Digital ADX1 Bodypack Transmitter with TA4F connector Band G57

$1,499.00

Brand:

  • Shure

-

Availability: Out stock

Out of stock

SKU: 14830mcs Category:
Overview

ADX1, like all ADX transmitters, sets the stage for exceptional performance, with wide tuning up to 184 MHz, interference protection, advanced rechargeability, streamlined design, and ShowLink remote control for real-time parameter adjustments right from the booth. Includes two SB910 rechargeable batteries.

Consumer Alert:

Most users do not need a license to operate this wireless microphone system. Nevertheless, operating this microphone system without a license is subject to certain restrictions: the system may not cause harmful interference; it must operate at a low power level (not in excess of 50 milliwatts); and it has no protection from interference received from any other device. Purchasers should also be aware that the FCC is currently evaluating use of wireless microphone systems, and these rules are subject to change.

Features

  • Removable antenna and fully concealed buttons and switch
  • Two connector options: TA4 and LEMO3
  • Advanced control menu with powerful features
  • Durable, moisture-resistant, lightweight metal case
  • Up to 10 hours of runtime with SB910 rechargeable battery
  • Diversity ShowLink enabled for remote transmitter control and automatic interference avoidance
  • External contacts for docked charging
  • Two transmission modes: Standard for optimal coverage and new High Density for maximum system channel count and robust coverage
  • Encryption-enabled, secure transmission
Specifications
RF Carrier Range

  • 470–960 MHz

Note: Varies by region (See Frequency Range and Ouput Power table) Working Range

  • 100 m (330 ft)
  • Note: Actual range depends on RF signal absorption, reflection and interference.

RF Tuning Step Size 25 kHz, varies by region Image Rejection

  • >70 dB, typical

RF Sensitivity

  • −98 dBm at 10-5 BER

Latency

  • Standard mode: 2.0 ms
  • High Density mode: 2.9 ms

Audio Frequency Response

  • AD1: 20 Hz – 20 kHz (±1 dB)
  • AD2: 20 Hz – 20 kHz (±1 dB)
  • ADX1: 20 Hz – 20 kHz (±1 dB)
  • ADX1M: 20 Hz – 20 kHz (±1 dB)
  • ADX2/ADX2FD: 20 Hz – 20 kHz (±1 dB)
  • Note: Dependent on microphone type

Audio Dynamic Range

  • A-weighted, typical, System Gain @ +10
  • XLR Analog Output: 120 dB (A-weighted); 117 (unweighted)
  • Dante Digital Output: 130 dB (A-weighted); 126 (unweighted)

Total Harmonic Distortion

  • −6 dBFS input, 1 kHz, System Gain @ +10

<0.01%
System Audio Polarity

  • Positive pressure on microphone diaphragm produces positive voltage on pin 2 (with respect to pin 3 of XLR output) and the tip of the 6.35 mm (1/4-inch) output.

Operating Temperature Range

  • −18 °C (0 °F) to 50 °C (122 °F)
  • Note: Battery characteristics may limit this range.

Storage Temperature Range

  • −29 °C (−20 °F) to 65 °C (149 °F)
  • Note: Battery characteristics may limit this range.
Pro Coverage
Manufacturer’s Warranty
One year warranty on wireless mics, mixers, and circuitry products.
2 year warranty on wired mics.
Warranty terms vary. Check with manufacturer for specific product warranty.