- You cannot add "Shure BLX288/PG58 Dual-Channel Wireless System with Two PG58 Handheld Transmitters H10" to the cart because the product is out of stock.
Overview
The MX202P Microflex Overhead condenser microphone captures Shure quality sound in a compact, adjustable package. The MX202P features a condenser microphone cartridge attached to a flexible, 4″ gooseneck with a 30′ cable. The plate-mounted preamp offers easy ceiling installation, and when combined with the high sensitivity cartridge’s wide frequency response, this microphone provides accurate sound reproduction with a minimum of RF interference or electromagnetic hum.
Also available with an inline preamp (see product # 270395).
Requires phantom power.
Features
- Wide dynamic range and frequency response for accurate sound reproduction across the audio spectrum
- Balanced, transformerless output for increased immunity to noise over long cable runs
Specifications
- Frequency Response
- 50 to 17,000 Hz
- Output Impedance
- 180 ohms actual (EIA rated at 150 ohms)
- Sensitivity (At 1,000 Hz, open circuit voltage*)
- Cardioid: -35.0 dBV/Pa (17.8 mV)
- Supercardioid: -33.5 dBV/Pa (21.1 mV)
- All values -12 dB at 0 gain; *1 Pascal = 94 dB SPL
- Maximum SPL (1 kHz at 1% THD, 1 k ohm load)
- Cardioid: 124.2 dB
- Supercardioid: 122.7 dB
- All values +6 dB at 0 gain
- Equivalent Output Noise (A-weighted)
- Cardioid: 28.0 dB SPL
- Supercardioid: 26.5 dB SPL
- Signal to Noise Ratio (referenced at 94 dB SPL)
- Cardioid: 66.0 dB
- Supercardioid: 67.5 dB
- Dynamic Range at 1 k ohm load
- 96.2 dB
- 100 dB at 0 gain
- Common Mode Rejection
- 45.0 dB minimum
- Preamplifier Output Clipping Level (1% THD)
- -6.0 dBV (0.5 V)
- -12 dBV at 0 gain
- Polarity
- Positive sound pressure on diaphragm produces positive voltage on pin 2 relative to pin 3 of output connector.
- Power Requirements
- 11 to 52 Vdc phantom, 2.0 mA
- Environmental Requirements
- Operating Temperature Range: -18 to 57 degrees C (0 to 135 degrees F)
- Relative Humidity
- 0 to 95%
- Cable Length
- 9 m (30 ft)
Pro Coverage
Manufacturer’s Warranty
One year warranty on wireless mics, mixers, and circuitry products.
2 year warranty on wired mics.
Warranty terms vary. Check with manufacturer for specific product warranty.
One year warranty on wireless mics, mixers, and circuitry products.
2 year warranty on wired mics.
Warranty terms vary. Check with manufacturer for specific product warranty.
Only logged in customers who have purchased this product may leave a review.
Reviews
There are no reviews yet.