Shure PGXD14/BETA98H Digital Wireless System with Beta 98H/C Mic

$479.00

Brand:

  • Shure

-

Availability: Out stock

Out of stock

SKU: 15298mcs Category:
Overview

The PGXD14/Beta98H Digital Wireless System from Shure adds the clarity of 24-bit digital audio to the legacy of trusted Shure microphone options for wireless performance. This system includes the Beta 98H/C, a precision-engineered miniature cardioid condenser microphone with integrated clip and gooseneck for horn applications, as well as a PGXD1 bodypack transmitter, and a PGXD4 receiver.

The Beta 98H/C is a premium cardioid condenser instrument microphone that clamps onto the bell of wind instruments or onto the rim of percussion instruments. The integrated gooseneck and ratcheting swivel joint allows the mic to be easily positioned and secured, and an isolation shockmount reduces the transmission of instrument ‘key noise’ and other mechanical noise. A gooseneck angle brace is included to provide better retention of the microphone placement during more active performances.

The rugged PGXD1 bodypack transmitter easily clips onto a belt or guitar strap, and provides you with a 20Hz – 20kHz frequency range, up to 10 hours of continuous use on 2 standard AA batteries (not included), and 200′ of wireless freedom.

The PGXD4 receiver offers 24-bit/48kHz accurate sound, offers technology for incredibly accurate sound, auto frequency selection, and greater reliability thanks to its true digital diversity.

 

Consumer Alert:

Most users do not need a license to operate this wireless microphone system. Nevertheless, operating this microphone system without a license is subject to certain restrictions: the system may not cause harmful interference; it must operate at a low power level (not in excess of 50 milliwatts); and it has no protection from interference received from any other device. Purchasers should also be aware that the FCC is currently evaluating use of wireless microphone systems, and these rules are subject to change. For more information, call the FCC at 1-888-CALL-FCC (TTY: 1-888-TELL-FCC) or visit the FCC’s wireless microphone website at: www.fcc.gov/cgb/wirelessmicrophones

Features

PGXD1 Transmitter with WA302 Instrument Cable

  • Rugged, compact bodypack with belt clip and instrument cable
  • 20Hz – 20kHz frequency range captures every nuance of your tone
  • Power, mute, and battery status LED
  • Up to 10 hours of continuous use from 2 AA batteries
  • 200′ (60m) operating range
  • 26dB of continuously adjustable gain to match variable input levels

PGXD4 Wireless Receiver

  • 24-bit / 48kHz digital technology for incredibly accurate sound
  • Automatic frequency selection locates a clear channel instantly
  • One-touch sync automatically syncs the transmitter and receiver
  • True digital diversity delivers rock-solid wireless signal reliability
  • Up to 5 systems can be used at once
  • 1.4″ and XLR audio outputs
  • Included padded carrying case for portability and protection

Beta 98H/C

  • 1.6m hard-wired cable
  • Tailored frequency response for open, natural sound reproduction
  • Compact, lightweight construction provides a low degree of visibility
  • Interchangeable microphone cartridges are available:
  • RPM108 – Cardioid cartridge
  • RPM110 – Supercardioid cartridge
Specifications
PGXD1 transmitter/strong>Audio input level: +10 dBV maximum, at minimum gain setting -16 dBV maximum, at maximum gainGain adjustment range: 26dBInput impedance: 1MÎRF Output Level: 10 mW maximum (dependent on applicable country regulations)Dimensions (HxWxD): 108mm x 64mm x 19mm (4.25″ x 2.50″ x 0.75″)Weight: 128g (4.5oz.) without batteriesHousing: Molded polycarbonate casePower requirements:Battery Life: Up to 10 hoursPGXD4 receiverDimensions (HxWxD): 40mm x 181mm x 104mm (1.6″ x 7.125″ x 4.1″)Weight: 289g (10.2oz.)Housing: ABSAudio Output Level (ref. ±38kHz deviation, 1kHz tone): XLR connector (into 3000Î load): -2.5dBV 1/4″ connector (into 10000Î load): +10 dBVImpedance:XLR: 50Î1/4″: 50ÎSensitivity: -102 dBm @ 10-5 BERImage rejection:

> 70dB, typicalXLR output:Impedance balanced Pin 1: Ground (cable shield)Pin 2: AudioPin 3: No AudioAudio LED:Red: 2dB below clipAmber: 12dB below clipGreen: 50dB below clipPower Requirements: 12-18 Vdc at 150 mA, supplied by external power supplyPin Assignments: XLR: 1 = ground, 2 = hot, 3 = cold 6.35mm (1/4″) TRS: Tip = audio, Ring = no audio, Sleeve = ground

Pro Coverage
Manufacturer’s Warranty
One year warranty on wireless mics, mixers, and circuitry products.
2 year warranty on wired mics.
Warranty terms vary. Check with manufacturer for specific product warranty.

Reviews

There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.